NewRuleFX Expendables and Supplies

Professional Hollywood Quality Blood -- Finally at Affordable Prices.

The NewRuleFX line of specially made stage blood is engineered to be just the right thickness, rich and saturated with color.

Wash-out, Professional Formula

DOES NOT CONTAIN CORN SYRUP OR SUGAR

Great for use on screen and on stage, this blood is formulated to be consistent from batch to batch, just thick enough to ooze realistically and is non-toxic. Though this blood may stain some surfaces and fabrics, it is created to be less staining than the typical red food coloring and corn syrup blood commonly available. Rinsing the blood soaked object in cold water should, in most cases give you a clean re-take!

This blood is non-toxic; However, it is NOT meant to be ingested.

1oz, 1-quart  and 1-gallon comes in plastic containers with screw top lids. 5-gallon comes in a plastic 5-gallon pail with pour spout

Approximate Sizes:

3 x 1 x1 Sample Size (1 oz) - comes in "Patient Zero" Blood draw Prop Vial

5" x 2" x 7" (Quart)

6" x 6" x 12" (Gallon)

12" x 12" x 15.25" (5 Gallon)

SKUs:

exbld001-1 (Quart)

exbld001-2 (Gallon)

exbld001-3 (5 Gallon)

FX Dirt is the NewRuleFX brand of clean movie dirt.

It's a light brown colored very fine powder. It fluffs and flows nicely and disperses well in air. Made from diatomaceous earth which is actually microscopic fossilized remains of diatoms, a type of hard shelled algae! This is a very "clean" type of dirt product. It contains amorphous silica and calcium bentonite clays. There is less than 1% harmful crystalline silica in this product, which makes this the perfect product when dust and dirt are required for use on set.

FX Dirt can be used in compressed air hoppers and ejectors to create blast effects. It is non-flammable and is not sensitive to static discharge. It can be dusted onto set pieces to age a set instantly, and is commonly sifted onto wardrobe to produce that great impact dust cloud that you see during fight scenes!

FX dirt is a very valuable product to have on hand; and now, we are able to bring it to you at prices that are lower than any leading FX supplier! So low in fact, that other companies buy our product, re-package it and sell it at higher prices!

Avoid breathing dust. Use respirators approved NIOSH/OSHA for silica bearing dust and eye protection when using FX Dirt.

Approximate Sizes: 

3.5" x 3.5" x 5.75" (1 lb)

9.75" x 9.75" x 9.75" (10 lb)

12" x 12" x 15.5" (20 lb) 

SKUs: 

fxdirt001-1 (1 lb)

fxdirt001-2 (10 lb)

fxdirt001-3 (20 lb)

Spike tape is a staple on the sets of Hollywood productions and Broadway stages alike. Essentially 1/2" wide gaffer's tape, spike tape is commonly used to mark sets and the positions of cast in productions.

Spike tape is commonly used to bundle cables, label equipment and is easily torn by hand. The specially engineered synthetic rubber adhesive grips strong and pulls away clean.

Our spike tape comes in 50 yard rolls, is 1/2" wide and comes in black and white.

Approximate Size: 6"x 0.5" x 6"

SKU: exstp001

What makes our line of gaffer's tape better than the rest?

How about precisely engineered synthetic-rubber based adhesive that grips strong and then pulls off cleanly. UV resistant cloth woven tape that tears cleanly with not frayed bits at the edge. The tough outer layer resists wear and abrasion under harsh conditions and has a matte finish to reduce light reflection. We know that gaffers tape is the expendable that really holds the entertainment industry together so we give you a gripping power of 45 pounds per square inch.

We present a product that makes things just a bit easier by being a quality product at an affordable price.

Available now in 2" width in black, grey and white. 12 Mil thick, 60 yards per roll.

Approximate Size: 6" x 2" x 6"

SKU: exgtp001

This simple and fun device allows a loaded stack of real or prop money, playing cards or any other similarly sized papers to be rapidly ejected from the gun into the air in a wonderful cascade. 

Open the top door, place a stack inside, the pull the trigger. A small wheel quickly ejects the bills in a steady fast stream.

Use our Prop Movie Money (As shown, and not included) and create a shower of money. Works great in front of camera, a fan or perhaps load the real deal into it and be the hit of your favorite entertainment spot.

Loaded with our stack of 100 bills, you'll be able to shoot $10,000 into the air in less than ten seconds! Now that's spending power.

Runs on one 9 volt battery (not included).

Prop movie money shown in images for demonstration and are not included with this item. and available for purchase separately.

SKU: CASHGUN

Approximate Size: 7.5" x 6.5" x 3"

Weight: 1 lb

This is a 16 dram amber plastic bottle with a push to open lid. Inside is filled with empty gelatin size 00 capsules that come in three different color options.

They are perfect for simulating drugs of all kinds. The capsules may be safely ingested. They do not contain anything inside. Cornstarch or any dry powdered material may be placed inside. The capsules will dissolve in water. 

The bottle has various and assorted marking on the lid but do not contain any label on the sides so you can create your own label to make it into the pills of your choice.

Each container contains approximately 24 capsules.

We offer these in three different style capsules. White/Blue, White, Yellow/Green

SKU:

• Blue/White: APMED001
• Green/Yellow APMED002
• White: APMED003

Approximate size: Vial:16 Dram, 3.25" x 1.5" x 1.5"

Capsules: Size 00, 7/8" x 3/8" x 3/8" (Assembled)

For motion picture, television, theatre entertainment prop use only. 

Three pounds of balsa wood debris. Sticks, pieces, and shards. Perfect for dressing up the set, putting into an air mortar or cannon or just as props. 

Each 16" x 10" x 8" box has an assortment of pieces ranging in thickness from 1/8" to 1" Random sizes, shapes and variety.

Balsa wood is light colored and very lightweight.

SKU: BLSADBR001

Approximate Size: 3 Lbs Net Weight

Don't confuse these with our industry leading Actor Cigarette Prop System. This item is the very inexpensive, novelty style fake cigarette that has been sold in magic shops, gimmick catalogs and prop shops for many, many years. 

Simple paper wrapped tube which contains a cotton-like inner fill that is sprinkled with cornstarch which, when blown out, creates a simulated smoke for just a few puffs. 

Simulated printed filter and a novel orange-red metallic "cherry" on the end that glints in the light creating the effect of a glowing end. A bit of fake ash and burnt paper end completes the illusion of a real burning cigarette. 

These are inexpensive, but nicely made and can work out well when this type of prop is all that is needed. For a more complete and realistic prop cigarette system, check out our Actor Cigarette System.

Contains 2 Prop Cigarettes.

SKU: EXPUFF2

Approximate Size: (1 cigarette) 3-5/16" Long x 5/16" Diamater

We use these on the set and around the shop, and we loved them so much, we decided to purchase in bulk and offer these to our customers as well. This is a spectacularly bright, compact CREE LED flashlight with a  great zoom feature that allows for pinpoint, intense, bright light, or a very wide flood of light.

This flashlight can be powered by 3 AAA batteries (Which we include) or an optional 18650 type Lithium-Ion Rechargeable battery (Not included.)

Water resistant, shock resistant. An all-around tough and durable tool.

Flashlight has three modes, High Power, Low Power and Strobe Light accessed be the rear rubber push button. Great on the set, behind the scenes, in your car home or anywhere you need durable reliable bright light!

FlameFX LED Fire Bulb 7.5" Overall Length

An electronic bulb that simulates a lightly burning flame. It features a two-direction animation. When the e27 socket base is down, the flames will move towards the top of the plastic housing. The socket is above, the flames will emanate from the top of the plastic housing and rise up towards the base. Turning the power off and on quickly will switch it to full LED fade mode that illuminates all the LED's in a flame effect fade sequence. Screw into a standard lightbulb socket and create amazing looking simulated flames. Diffused plastic cover creates a very realistic flame effect.

(Socket shown in the picture with LED's lit not included)

• Model APQP001 (7.5" E27 Base)
• Power Consumption: 9 Watts
• Input Voltage  85 to 265V AC
• Color Temperature: 1300K
• LEDs: 99Pcs
• Size: 60x60x193mm (2-3/8" diam x 7-1/2")
• Modes: 3 (All Fade, Upright Animated, Inverted Animated)

           NewRuleFX is a Registered Trademark

A clapperboard is a device used in filmmaking and video production to assist in the synchronizing of picture and sound, and to designate and mark particular scenes and takes recorded during a production. The sharp "clap" noise that the clapperboard makes can be identified easily on the audio track, and the shutting of the clapstick can be identified easily on the separate visual track. The two tracks can then be precisely synchronised by matching the sound and movement. Other names for the clapperboard include clapper, clapboard, slate, slate board, slapperboard, sync slate, time slate, sticks, board, and sound marker.

This clapperboard is made from durable acrylic and features color sticks for aid in quick color adjustment. The sticks have magnetic inserts to insure a smart "clack" and will also keep them from opening when not in use. There is sections for Take, Scene, Roll, Production, Director, Camera, Date Night, Int/Ext Mos Filter and Sync.

Slate is compatible with dry-Erase brand markers and water based markers. 

Rear of slate is blank. 

Size: 11.75" Wide x 9.75" Tall x .75" Thick

FlameFX LED Fire Bulb 6" Overall Length

An electronic bulb that simulates a lightly burning flame. It features a two-direction animation. When the e27 socket base is down, the flames will move towards the top of the plastic housing. The socket is above, the flames will emanate from the top of the plastic housing and rise up towards the base. Turning the power off and on quickly will switch it to full LED fade mode that illuminates all the LED's in a flame effect fade sequence. Screw into a standard lightbulb socket and create amazing looking simulated flames. Diffused plastic cover creates a very realistic flame effect.

(Socket shown in the picture with LED's lit not included)

FlameFX LED Fire Bulb

• Model APQP006 (6" E27 Base)
• Power Consumption: 6 Watts
• Input Voltage  85 to 265V AC
• Color Temperature: 1400K
• LEDs: 99Pcs
• Size: 63x63x153mm (2-1/2" diam x 6")
• Modes: 3 (All Fade, Upright Animated, Inverted Animated)

           NewRuleFX is a Registered Trademark